DC MOTOR PUMP GROUP 1
Basic Description
Consisting of a hefty duty DC motor and the CB1S gear pump, this pump motor group is definitely an ideal hydraulic power unit for mobile hydraulic equipments, such as car carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP two
Standard Description
This motor pump includes four.5″ DC motor, a CBSR gear pump with built-in relief valve and verify valve.
DC MOTOR PUMP GROUP three
Basic Description
This motor pump consists of a 4.5″ DC motor as well as a CBSR gear pump which has a normal electrical power up/gravity down circuit that has a relief valve, a verify valve plus a solenoid release valve.
Particular Notes
1. This electrical power 
unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean every one of the hydraulic elements concerned before mounting the electrical power unit.
three. Viscosity of your hydraulic oil shoud be 15~68 cst, which must also be clean and free of charge of impurities. N46 hydraulic oil is proposed.
4. The energy unit need to be mounted horizontally.
5. The relief valve strain is preset about 25% greater compared to the operating strain.
six. Flow management valve for lowing speed adjustment is obtainable unpon request.
