How to install and use JS snake spring coupling

Serpentine spring couplingIt is a metallic coupling with a structure that relies on serpentine springs to transmit torque.It has good damping performance, long service life, large load changes, starting; transmission, operation, low noise, good lubrication, simple structure, convenient assembly and disassembly, and large installation deviations are allowed.Although the serpentine spring coupling has so many features and advantages, many brothers have changed it.As a user unit of the serpentine spring coupling, our company did not follow the example, but used it, and received good results. The two 2D-T3/34 high-pressure pumps have been running smoothly since they were put into use in 13.5.Pay attention to the following aspects in use.

1,Snake spring couplingInstallation and alignment, control reasonable deviation

Although the serpentine spring coupling allows a large installation deviation, it should also be within the specified value during installation

(1) Align the gap and angular deviation between the two-lobe couplings. When installing, measure the gap between the two-lobe couplings every 90°, and the difference between the large value and the small value does not exceed 0.38mm.

(2) Correction of radial deviation.Put a ruler on the two-part coupling, measure it every 90°, and check with a ruler, the radial deviation does not exceed 0.38mm.

2. Choose the right grease

The temperature of the oil injection point is ≥150℃, which can resist centrifugal force, has separation stability, no impurities, and does not corrode carbon steel and nitrile rubber lithium-based grease.

3. Fill enough lubricating grease

Adequate grease is very important for the work of the coupling, and it is recommended to check it once a year.Use a dry grease gun to inject grease until there is excess grease overflow in the hole.