Select Page

Why Coupling Grease?
Sufficient lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is specifically created for gear coupling applications to boost coupling existence when dramatically minimizing maintenance time. Its higher viscosity base oil and tackifier combine to maintain the grease in spot and avert separation and it is in full compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in shade and produced by using a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to substantial centrifugal forces usually discovered in couplings. Bearing or standard function greases have a tendency to separate and eliminate effectiveness due to large centrifugal forces around the a variety of ingredients at large rotational speeds. These substantial centrifugal forces encountered in couplings separate the base oil from your thickeners. Heavy thickeners, which have no lubrication attributes, accumulate in the gear tooth mesh place resulting in premature coupling failure. Gear Coupling Grease is designed to highly resistant to centrifugal separation from the oil and thickener, which makes it possible for the lubricant to get used for a fairly extended time period of time.
One of the secrets to your results of Gear Coupling Grease will be the variable consistency throughout the operating cycle of your application. The consistency of our gear coupling grease alterations together with the working disorders. Functioning with the lubricant underneath actual support problems brings about the grease to develop into semi-fluid, functionally solash lubricating the dress in surfaces with the coupling. As the grease cools, it returns on the original consistency, thereby avoiding leakage.
Gear Coupling Grease is obtainable from stock in 14 oz. cartridges, 1 lb. and five lb. cans.
Capabilities
Minimizing of coupling dress in
Resistance to water washing
Corrosion and rust protection
Substantial load carrying abilities
Extended relubrication frequency
Use at temperatures as much as 325° F
Staying in spot under higher speeds
Resistance to centrifugal separation
Reduction in down time & upkeep cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated using a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.