Select Page

Rugged construction Type “MD” Buckets are most well-liked for general function elevators. Covering a wide selection of sizes from 4 to 20 inches prolonged, they can be used for ?ne and medium dimension elements such as coal, cement, pulp, grain, ear corn, and so on. They are really broadly applied for heavy abrasive materials such as sand, gravel, and stone. Reinforced front lips give Type “MD” Buckets a long wearing digging edge. Uniform wall thickness and sturdy corner reinforcement make them stronger than steel buckets on the very same gauge.They can be smoothly surfaced and also have ends sloped inward at six degree angles to insure proper ?lling and clean discharge. Offered in Malleable and Al-lied-Locke Promal.
Chain for which buckets can be found in-clude: Steel Bushed Roller, Steel Bushed, Blend, “H” Class Mill, 400 Class Pin-tle, and 700 Class Pintle. “MD” Buckets are made use of with G1, G6, K1, or K2 type attach-ments once they can be found in the chain sort.
Capacities are for buckets ?lled to your line XX (see diagram). The useful working capacity will vary using the loading circumstances, angle of re-pose in the material remaining handled, plus the incli-nation of your elevator.
Type “AC” ELEVATOR BUCKETS for handling cement, lime, and ?uffy supplies
Fashion “AC” Buckets offer rapid, thorough discharge of cement, lime, and various dry, ?uffy elements. Vent holes while in the bottom of each bucket release trapped air in ?lling and permit materials to empty from bucket quickly and totally on discharge. Moreover to reinforcing lips, hooded backs reinforce “AC” Design Buckets. This feature permits closer bucket spacing and gives 30% greater carrying capability than other bucket designs with the very same length. These sturdy buckets have an extra thickness of metal at dress in points for longer service. Available in Al-lied-Locke Malleable and Promal.
Design “AC” Buckets are usually employed with heavy duty engineering chain this kind of as Bushed Steel Chain with K2 and K3 design attachments.
Capacities are for buckets ?lled to both line XX or YY (see diagram). The sensible operat-ing capability will fluctuate with loading problems, angle of repose of your material getting dealt with, along with the inclination with the elevator.